-40%

KEMO M167N Level Indicator for Water Tanks Made in Germany

$ 19.71

Availability: 20 in stock
  • Condition: New
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Type: Water Level Indicator
  • Item must be returned within: 30 Days
  • Brand: Kemo
  • MPN: M167N
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    Deutsche Post Tracked Sending
    Because of Corona currently not possible!
    (max. US$ 30 value of goods)
    up to 0,5 kg
    US$ 9.36
    up to 1,0 kg
    US$ 14.54
    Canada & USA Fedex Parcel Service
    Up to 5,0 kg
    US$ 39.38
    Up to 10,0 kg
    US$ 51.80
    Up to 15,0 kg
    US$ 62.65
    Up to 20,0 kg
    US$ 71.80
    Up to 25,0 kg
    US$ 85.56
    Up to 30,0 kg
    US$ 95.23
    Worldwide Fedex Parcel Service
    Up to 5,0 kg
    US$ 89.87
    Up to 10,0 kg
    US$ 132.45
    Up to 15,0 kg
    US$ 159.52
    Up to 20,0 kg
    US$ 182.30
    Up to 25,0 kg
    US$ 216.93
    Up to 30,0 kg
    US$ 241.28
    KEMO M167N Level Indicator for Water Tanks
    (M167N)
    You buy one KEMO M167N Level Indicator for Water Tanks
    Remote Sensing up to 100 m
    Battery-powered level indicator for measuring the liquid level of water tanks such as rainwater, sewage chambers or slurry tanks from a distance of up to 100 m. After touching the button, indication occurs via 10 LEDs in steps of 10% each (indication 10 - 100%). The device is earmarked for wall assembly (approx. 131 x 78 x 36 mm) and requires 2 batteries „AA“. Connection is made via terminals inside the device. A normal signal cable (telephone cable, control wire or the like) with at least 11 cores is necessary to connect your water tank with the level indicator (cable is not included). You may also employ cables with less cores, but then it will not be possible to use all indication steps (e.g. with 8 cores only 7 LED indication steps may be used, which is, however, often sufficient).
    Extension in case of bigger measurements
    This module is normally to be used for measuring water levels in rain containers, water containers, etc. Our clients have asked us if the module can be used to measure bigger containers like for example a dwell, where the separation of the measurement electrodes is of approx. 5 m. Due to the big separation between the higher and the lower electrode in this kind of measurements (approx. 40 m), the intensity of the measurement display (LED´s) can become weak. In order to avoid this, we recommend installing the electrodes with a parallel long tube for all of the electrodes (See picture).
    Technical Data
    Operating voltage
    3 V (2 AA batteries, not attached)
    Display
    max. 10 LEDs and 1 LED for the battery control
    Measuring points in the water tank
    1 - 10, switchable
    Current consumption during the measurement (button is pushed)
    max.
    120 mA if all LEDs light up
    Max. cable length between the level indicator and water tank
    100 m
    Required cable to the water tank
    telephone cable or similar cable with at least 11 cores
    Measuring current at the water tank probe
    approx. 50 μA per channel
    Dimensions
    approx. 131 x 78 x 36 mm
    Shipping weight: approx. 0,23 kg
    Duties & Taxes
    The recipient of an international shipment may be subject to import duties and taxes, which are levied once a shipment reaches the destination country. For all orders, the client is fully responsible for paying any customs duties and taxes. Additional charges for customs clearance must be also borne by the recipient; AAAA Electronic has no control over these charges and cannot predict what they may be. Customs policies vary widely from country to country; you should contact your local customs office for further information.
    EINGESTELLT MIT