Burn-in Oven chamber Micro Instruments Co CH700 PE9000

Description

Burn-in Oven chamber Micro Instruments Co CH700 PE9000
This is a used burn-in oven in good operating condition.  Oven has a main chamber that is 27x15x16.  The backwall of the main chamber holds the circuit board connectors that throughput to the mating connectors in the back of the chamber.  The back of the unit has slots for the instrument cards and a rack of power supplies.
Chamber has an operating range of ambient to 250 DEG C, with the over temp controller set to 260Deg C.  Unit was tested up to 150 Deg C and it worked well. This is a well built older American chamber in good condition.
digital temperature controller
overtemp controller
Chamber dimensions: 27x15x16
12 board slots
12 bias power supplies in rear of chamber
flow meter on right side
Specifications:
MFG:       Micro Instrument Company
Model:     CH700
Serial:
Volts:      208/220
Amps:
Phase:    1
Year:
Drive:
Controls:
Manuals:
Air:
Weight:   appx 600 Lbs
Condition: used good
Length:   58
Width:     46
Height:    37
All dims inches unless otherwise noted
Inventory #: 8620
Location: Hanger
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.